Evans Vanodine Enhance - Metalised Ultra High Solids Wet Look Floor Polish - 2 x 5L

Evans Vanodine Enhance is a leading floor polish used in the most prestigious establishments. This high solids metallised product dries to an extra durable, wet look gloss finish. It is recommended for most floors including vinyl, rubber, asphalt, marble, terrazzo and sealed surfaces.

RECOMMENDED FLOOR SURFACES: Vinyl composition tile (VCT), terrazzo, marble, concrete, quarry tile. This UHS floor finish is formulated with a special blend of resins, waxes & polymers to provide a long lasting, high gloss finish that can stand up to the heavy daily traffic and maintenance that is seen in retail or institutional facilities.

INITIAL APPLICATION: For a floor that has been stripped, properly neutralised, rinsed and allowed to dry thoroughly, apply 5-6 thin coats of ENHANCE HD using a clean synthetic mop. Allow the floor to dry thoroughly between coats and prior to burnishing. Drying time depends on a number of factors. At 200C approx. 30 minutes between coats and 3 hours minimum before burnishing. Optional: Apply 2 thin coats of SEALANT B floor sealer for old or porous floors or for high traffic areas before applying ENHANCE HD.

ROUTINE MAINTENANCE:

Sweep floor daily with a dust mop.

To clean floor use a mop or automatic scrubber with a neutral cleaner.

Restore shine as needed with CLEAN & SHINE maintenance cleaner to improve gloss and repair polish damage or wear.

Burnish with ultra high speed machine and pad. One pass is all that is usually required.

When desired results can no longer be achieved by routine maintenance, strip floor using SURE STRIP and re-apply ENHANCE HD as shown in initial application.

• Solids content 25%.
• Ideal for very heavy traffic areas.
• Formulated to an ultra high solids level for extra floor protection.
• Superb levelling properties to ensure a smooth, even finish.
• Anti-slip finish for a safer working environment.
• Ultra scuff resistant, making it easier to clean and maintain.
• Superior response to high and ultra high speed burnishing.
• Coverage per 5ltr 400/500 sq. metres for a single coat.
• Has a pH of 8.6.

Pack Size: 2 x 5 litres