Evans Vanodine Safe Zone Plus - Virucidal Disinfectant

Evans Vanodine Safe Zone is a virucidal disinfectant for treating hard surfaces and soft furnishings contaminated with potentially infectious soiling.

The product effectively destroys a spectrum of pathogenic micro-organisms to help prevent the spread of infection. 

Widely used in schools, nursing and medical organisations or places where there is a risk of infection.

• Remove general soiling and disinfect in a single operation.
• Helps to prevent cross infection.
• Suitable for use on all washable surfaces.
• Ideal for use in health care organisations.
• Passes EN1276; at a dilution of 1:25 with a contact time of 30 seconds under dirty conditions.
• Has a pH of 12.5.

5 Litres:

DISINFECTING & CLEANING HARD SURFACES: Dilute 1:25 parts hot water (200 ml per 5 L / 7 pumps x per 5 L) in a bucket. Mop or wipe surface. Allow to air dry.

TREATING & DISINFECTING CONTAMINATED AREAS & CARPETS: Dilute 1:25 parts hot water (200 ml per 5 L / 7 pumps x per 5 L) in a bucket. Wear disposable gloves. Remove any soiling & dispose of safely. Wipe or spray contaminated area & leave for 5 minutes. Apply further amount & gently agitate carpet with a soft nylon scrubbing brush. Blot carpet dry with paper towels & dispose of safely.

750ml RTU:

DISINFECTING & CLEANING HARD SURFACES: Spray onto surface & wipe with a clean damp cloth or disposable paper towel.

TREATING & DISINFECTING CONTAMINATED AREAS: Wear disposable gloves. Remove any soiling & dispose of safely. Spray surface & leave for 30 seconds. Spray further amount, wipe surface with a paper towel & dispose of safely.

To re-fill the trigger spray bottle add 25 ml of SAFE ZONE to 600 ml of cold water:

Pack Size: 6 x 750 ml & 2 x 5 litres.